I'm partially warped!!! =P

 

Many of you probably already understand the "warp/weft" idea from fabric/sewing/quilting. 

 



 

 

 

Hold onto this idea...then, follow a beginner (me) as threads become warped so they can eventually dance and play with weft threads.

 

This is looking from the top...down onto my loom...an

 8H Baby Wolf

And, these threads (Maysville 8/4 cotton) are going to be my warp.

 

(side view)

 

 

I'm soo excited (...I can't hide it!! - Pointer Sister's style).  See those little loopy-ties?  Each loop represents 8 single threads through the eyes of stainless steel heddles.

 

This is the view as I will sit in my chair to weave.  Although, the loom is still not fully dressed and ready for it's weft fibers.  Each of the threads still need to go through a reed

 

One heddle eye

 

I put a white paper behind so that you could see the 8 heddles in a row, threaded and

looped together. 

 

In all, I threaded 240 threads thru those "eyes".  It took about 2.5 hours.  That might be slow.  But, it's only my second time.  First time I had someone actually helping thread. You might be thinking, YIKES! THIS looks VERY tedious.  It wasn't for me.  I really enjoyed the semi-relaxing, almost think-less motions of the process.  I was a little sad when it was complete.  That's good, right?  Yep, 'cause I will be looking forward to my next threading.

 

However... this isn't the beginning.  I had to create the warp threads from cones of thread, 240 strands of thread, each to be 5.5 yards long. The length was predetermined by how long and how many towels I'm going to make and including some waste.

 

I came up with a rather crazy method to get my warp threads ready. It's a bit unorthodox.  You know me...I'm always looking for a way to re-invent "the wheel".  Sometimes I just waste time trying to find an easier way. Sometimes, I'm lucky enough to bump into a way that works better for me than the "normal" way.  =P

 

The three methods pictured below, all have something in common....

 

 



 

 

They use lifted arm(s), mostly (and can cause the back to feel really tired) to create the proper length and number of threads needed.  It's important that each thread of the warp be the same/correct length.  I see these methods, and I start to think (which is usually dangerous).  After wrapping the length I need a bunch a times around the pegs, using mostly my arms and back...my arms/shoulders/back will really be complaining of aches the day after. 

 

Now, if there was a way to use more leg, keeping my back straight and not having to lift my arm for long periods of time... that would be a lot better.  I don't mind walking all that much and if they take the brunt of the work, my arms and shoulders are MUCH happier.  Thought juices flow and light goes on!

 

...enter two saw horses from my husband's workshop and a dissected warping board.

 

With this method, I don't have to make as many wraps because I can space the pegs further away

from each other.  And, I can walk back and forth between the pegs using a lot less arm and more leg.

If a person didn't have enough space in one room, the saw horses could be placed down a hall or (weather permitting), in the garage.

 

I kept the cone of thread in a bucket so that it wouldn't run all over the floor as I walked and passed the thread around each peg.  One problem did surface.  If I pulled the threads just a teensy taught, the saw horses slightly tipped inwards towards each other.  Solution for next time - weight the legs of the saw horse down.  I'm not sure with what tho.  Would you have any ideas? 

 

The important CROSS needed to help keep threads straight when they go to the loom. More info HERE





 

There are more steps to get the warp to where I was able to thread each thread thru a single heddle eye like the photos at the beginning of the post.  Those steps are a bit blurry in my memory.   Yuh...it takes several a bunch of times for me to learn a process with multi-steps (usually more than 3, =P!).  I was concentrating while the teacher was instructing me...and I forgot to take better pictures.  But, maybe next time the concentration will make a better imprint.  And with photos, I can explain this area of the process more clearly. 

 

Anyway,  I'm having fun...learning to get WARPED.  You're whispering under your breath..."she's been warped for quite some time now, poor thing".  =P

 

Dare I ask for a Whoop-Whoop for a "warped" accomplishment?  Are any of you, out there, weavers? or have you ever thought about learning to weave?